Care of Spring and Gas Airsoft Guns – A Short Course
OK, I am back with another short course on care of airsoft guns, this time we will help the beginners and week enders with some tips and suggestions that will improve .458 socom ammo the performance and add longevity to their weapons.
This was the first type of airsoft gun and still the most reliable. With proper care it will last for years.
Oil all parts of gun slightly after each use. Clean inside of barrel before and after each use with cleaning rod, patch and silicone oil.
Relieve the tension in the main spring and any others such as the magazine spring.
The main spring tension is relieved by pulling the trigger, with gun pointed in a safe direction, firing the gun will remove the tension.
To relieve the tension in the magazine spring, you must unload the magazine.
Get the gun wet or drop it.
Use real gun oil or any oil other than silicone oil.
Put the gun away for any length of time without the proper oiling and cleaning. (See above)
There are two types of gas guns that are popular today, CO2 and Green Gas. We will discuss these separately.
Oil the gun inside and out after each use. Clean inside of barrel before and after each use with a cleaning rod, patch and silicone oil.
Use only the correct CO2 cartridges